To Next PageTo Next Page
Need help?Do you have a question about the Boston Whaler 270 Outrage and is the answer not in the manual?
General| Maximum Horsepower | 600 hp |
|---|---|
| Beam | 9' 6" (2.90 m) |
| Weight | 6, 500 lbs |
| Fuel Capacity | 200 gal (757 L) |
| Seating Capacity | 12 |
| Draft | 20" (0.51 m) |
Explains the purpose and scope of the owner's manual, emphasizing safety and operation.
Details the founding and key innovations of Boston Whaler boats, highlighting durability and stability.
Details the unique Unibond™ construction, materials, and hull design of Boston Whaler boats.
Explains the importance and location of the HIN for vessel identification and correspondence.
Provides guidance on where to take the boat for authorized service and maintenance.
Lists the key physical and performance specifications of the 270 Outrage model.
Details the standard equipment and components included with the 270 Outrage model.
Outlines optional equipment and accessories available for customization of the 270 Outrage.
Identifies and illustrates the various through-hull fittings and their functions on the boat.
Illustrates and lists all available storage compartments and areas on the 270 Outrage.
Describes the standard and optional seating configurations and cushions on the 270 Outrage.
Shows the placement of important safety labels and provides related deck safety advice.
Explains the fuel tank capacity, fill location, and the rigging trough for routing lines.
Details the function and maintenance of the fuel vent and engine remote oil systems.
Provides critical safety precautions regarding static electricity during fueling operations.
Outlines the boat's electrical system components and provides essential battery maintenance advice.
Explains the function and configuration of the dual battery selector switches for power control.
Illustrates the console, hull, and breaker panel wiring layouts for troubleshooting.
Describes the safety switch and its operation for immediate engine shutdown.
Identifies and describes the various gauges and switches on the helm instrument panels.
Lists the amperage ratings for each circuit breaker in the main electrical panel.
Explains shore power connection, battery charging, and the 12V accessory receptacle.
Explains the function, operation, and safety regulations for navigation lights.
Details the freshwater tank, pump, shower, sink, and essential maintenance like disinfecting.
Explains the operation of the raw water intake, pump, seacock, and the boat's livewell.
Details the aft and forward bilge pump systems, their float switches, and operation.
Describes the head compartment, Sani-Potti unit, and various waste discharge methods.
Explains how to operate and maintain the boat's hydraulic steering system.
Describes the single-lever control for engine shifting and throttle operation.
Details the DTS® system, power trim operation, and engine starting procedures.
Provides information on propeller selection, effects of pitch, and assembly components.
Explains how to operate and maintain the boat's trim tabs for optimal performance.
Details the use of mooring cleats and safe methods for lifting the boat.
Covers hull cleaning, blister prevention, and procedures for bottom painting.
Offers tips for maintaining vinyl cushions and preparing the boat for long-term storage.
Details how to clean and maintain the boat's canvas covers and framework.
Discusses trailer features, safety measures, and bunk trailer terminology.
Explains anchoring principles, lowering, setting, and weighing the anchor.
Describes the operation of the optional anchor windlass system from the helm or remote.
Provides a template for recording scheduled service and maintenance performed on the boat.
