6
Assembly of the various elements
1. Remove with care all the elements out of their packaging. Verify that all parts are included.
2. Put the water reservoir on a fl at and stable surface. Install the fl oat (6), the lid (5) then, the baskets (3).
3. Insert the light support (1b) on the lighting pole (1a) (see fi gure 1 below) then, insert the lighting pole
into its place (fi g. 2). You will feel a "click" (fi g. 3).
4. Open the packaging of one or several Lingot(s)®, push them out of the box using as shown (fi g. 4).
Insert the Lingot(s)® into the basket(s) (fi g. 5).
You can cut the name label on the packaging of the Lingot® and insert it behind the basket to identify
your plants (fi g. 6).
1a
1b
Fig. 1
Fig. 2
Fig. 3
Fig. 5
Fig. 6
POUSSEZ POUR
SORTIR LE LINGOT
Fig. 4
EN
To Next Page
Loading...