Need help?Do you have a question about the Bowers & Wilkins Active Subwoofer ASW600 and is the answer not in the manual?
General| Brand | Bowers & Wilkins |
|---|---|
| Model | Active Subwoofer ASW600 |
| Category | Subwoofer |
| Language | English |
Details the conditions and limitations of the warranty coverage.
Outlines the procedure for obtaining warranty service and required documentation.
Crucial safety guidelines to prevent hazards like electric shock and ensure safe operation.
Interprets symbols used in the manual to highlight important information or warnings.
Lists general warnings related to product usage, installation, and maintenance.
Component responsible for dissipating heat from the amplifier.
Terminals for connecting speaker-level audio signals from an amplifier.
RCA inputs for connecting line-level audio signals from a pre-amplifier.
Switch to adjust the subwoofer's bass response characteristics.
Adjusts the crossover frequency for the low-pass filter, blending subwoofer bass with main speakers.
Allows adjustment of the subwoofer's phase to improve bass integration with main speakers.
Bypass the low-pass filter, typically used with processors that handle filtering.
Selects between continuous 'On' mode and 'Auto' standby mode based on signal presence.
LED that indicates the subwoofer's current operational status (On or Standby).
Adjusts the subwoofer's output volume level.
Cable used to connect the subwoofer to the mains power supply.
Main switch to turn the subwoofer's power completely on or off.
Explains the subwoofer's role and setup for home theatre systems, including LFE channel.
Details how to use the subwoofer to extend bass response in standard stereo setups.
Describes the 'On' mode where the amplifier is permanently active.
Explains the 'Auto' standby mode, which activates with signal and enters standby without.
Recommended initial control settings for home theatre applications.
Recommended initial control settings for 2-channel stereo audio setups.
Guidance on fine-tuning subwoofer settings for optimal performance in home theatre.
Tips for fine-tuning the subwoofer for the best integration in 2-channel stereo systems.
Explains the function of the EQ switch and how room acoustics affect bass response.
To Next Page