Boxx Meridian - Page 6

UK Head Office: +44 (0)845 643 2874 z Fax: +44 (0)207 900 6350 z www.boxx.tv z sales@boxx.tv
QUICK SET UP FOR STANDARD OPERATION
Transmitter setup
1. Ifusingatransmitterwithabatteryplate,placethetransmitteronthebackofthecamera.Clipthecamerabatteryontheback
 ofthetransmitter.Thiswillpowerboththecameraandtransmitter.
 Ifusingatransmitterwithoutabatteryplateusethepowercableprovided.
2. Connectthevideofromthecameratothetransmitter.NotetherearedifferentinputsforHDSDI/SDI,compositeandcompo-
nentvideo.
4. IfusingSDIorHDSDIvideotheSDIembeddedaudiowillbesentoverthelink.
3. Ifusingcompositeorcomponentvideo,selectwhataudiocableyouaregoingtouse.
Usual cables for Meridian transmitter
CBL104–3.5mmheadphoneoutput.
Onthekeypadpressthe‘E’ button.Thiswilldisplaytheinputpage.Selecttestpatternifitisnotalreadyselected.