Boya BY-MM1+ - Trouble shooting; Common Issues and Solutions

Trouble shooting
If you have any problem using the BY-MM1+ components,
use the following checklist.
If any problem persist, please consult our local dealer, or
contact us directly at sales@boya-mic.com.
11
Problem Solution
Too much
ambience
noise is being
picked up
No sound
monitor
Make sure that the microphone is as close as
possible to the subject. A certain amount of ambient
noise is unavoidable in loud environments.
Otherwise, the BY-MM1+ supports playback
monitoring only.
The
microphone
can’t work
Make sure that using the correct audio connector.
1) For smartphone, tablet or Mac, using 3.5mm
TRRS to TRRS output cable.
2) For others devices, using 3.5mm TRRS to TRS
output cable cable.