The BOYA BY-PM500W is a versatile dual-function microphone designed for both wired and wireless operation, catering to gamers, streamers, and podcasters. It offers a range of features to customize audio capture and ensure high-quality sound.
Function Description:
The BY-PM500W functions as both a wired USB microphone and a wireless microphone system. In wired mode, it connects directly to smartphones or computers via USB-C or USB-A, providing a stable and high-resolution audio input. In wireless mode, it utilizes a dedicated receiver that connects to an external device, offering freedom of movement. The microphone features selectable cardioid and omnidirectional pickup patterns, allowing users to adapt to different recording environments and sound sources. A built-in 3.5mm headphone jack enables real-time audio monitoring, ensuring clarity and intelligibility during recording or streaming. The microphone also incorporates a multi-function control knob for headphone volume, microphone gain, and mute functions. The wireless receiver includes a mono/stereo switch for flexible output options.
Important Technical Specifications (Wired Operation):
- Mic Capsule: 14mm Condenser Capsule
- Polar Pattern: Cardioid / Omnidirectional
- Frequency Response: 20Hz-20kHz
- Sensitivity: -36dB (0dB=1V/Pa, 1kHz 1Pa)
- Signal-to-Noise Ratio: 80dB
- Maximum SPL: 110dB
- Sampling Rate: 48kHz
- Bit Rate: 24bit
- Mic Gain: 0~54dB
- Working Voltage: 5V/100mA
- Audio Output Connector: 3.5mm Headphone Jack, USB-C Port
- Operating Temperature: 0°C to 50°C
- Storage Temperature: -20°C to +55°C
Important Technical Specifications (Wireless Operation):
- Mic Capsule: 14mm Condenser Capsule
- Polar Pattern: Cardioid / Omnidirectional
- Frequency Response: 35Hz-18kHz
- Sensitivity: -36dB (0dB=1V/Pa, 1kHz 1Pa)
- Signal-to-Noise Ratio: 80dB
- Maximum SPL: 110dB
- Transmission Type: 2.4GHz
- Modulation: GFSK
- Antenna: Dipole Antenna
- Operating Range: 10m (Indoors with obstacles)
- RF Output Power: <10mW
- Distortion: <0.05%
- Battery Life: 8 Hours
- Charging Time: 1.5 Hours
- Battery Capacity: 800mAh
- Dimensions (TX): 226.7×100×100mm
- Dimensions (RX): 71.6×27.1×10.55mm
- Weight (TX): 660g
- Weight (RX): 12.5g
Usage Features:
- Dual-Functionality: Seamlessly switch between wired and wireless modes for maximum flexibility.
- Selectable Polar Patterns: Choose between Cardioid and Omnidirectional patterns.
- Cardioid: Maximizes the rejection of sound coming from the sides and rear, ideal for capturing full, rich, natural-sounding audio for podcasts, speech, dialog, instruments, etc.
- Omnidirectional: Picks up sound equally from all directions, capturing a natural blend of voice and ambiance with low sensitivity to wind and handling noise, suitable for vocal plosives.
- Headphone Monitoring: A 3.5mm headphone jack allows for real-time audio monitoring to ensure optimal sound quality.
- Multi-Function Control Knob: A single knob manages headphone volume, microphone gain, and mute functions.
- Default: Headphone volume control.
- Short Press: Mute the microphone.
- Long Press: Switch between gain control and headphone volume control.
- Turn Knob: Adjust mic gain or headphone volume.
- Angle Adjustment: Loosen the locking knobs on both sides of the microphone to adjust its angle, then tighten to secure.
- Wireless Pairing: The transmitter and receiver are pre-paired from the factory. If disconnected, double-click the TX's power/pair button to enter pairing mode, then simultaneously press the RX's volume control (+ and -) buttons to enter pairing mode. Indicators will show pairing status (unpaired: slowly flashing blue; pairing: quickly flashing blue; paired successfully: solid blue).
- Wireless Function Activation: When using wired function, a short press of the power button enables wireless function simultaneously. Double-click the power button to enter pairing mode. Press again to disable wireless function.
- Output Mode Selection (RX): The receiver features an M/S switch to select between mono or stereo output modes.
- Connectivity: Includes USB-C to USB-C cable, USB-A to USB-C cable, and a USB-C female to USB-A male adapter for broad compatibility with USB-C devices, Mac/Windows computers, and USB-A devices.
- Rugged Integrated Desktop Stand: Provides a stable base for the microphone.
Maintenance Features:
- Factory Reset: To restore factory settings for optimum sound, press and hold the headphone volume/gain/mute control knob and the polar pattern switch simultaneously. The indicator will blink red three times to confirm the reset.
- Battery Life: The transmitter offers 8 hours of battery life, with a charging time of 1.5 hours.
- Wireless Signal Considerations: Due to 2.4GHz wireless frequency, signal can be attenuated by obstacles like walls and buildings, and proximity to other 2.4GHz devices (Wi-Fi antennas, smartphones) should be avoided to prevent interference.
- FCC Compliance: The device complies with FCC rules, ensuring it operates without causing harmful interference and accepts any interference received. Users are advised to reorient/relocate the receiving antenna or increase separation between equipment and receiver if interference occurs.
Need help?
General
To Next Page
