1.With the podium step in
a closed position, ensure
all castors are locked
2.Open Rear frames and
lock the locking elbow
joints into position
3.Square and position the platform at
the chosen height and turn the wind
lock to the closed position
4.Position ladder on to lower
rung and push down making
sure ladder hooks are locked
within the guides. Now do the
same to the top of the ladder
5.Make sure the castors are at
a 45-degree angle and then
lock into place
6.Fit podium stabilisers at a 45-
degree angle (see photo A)
Unless against a wall (see
photo B) Making sure stabiliser
is located on the floor
8. Move the gate from the locked
position and secure it behind you.
Make sure it is locked, never use
the podium without locking the gate
9. Using the ladder, climb onto
the podium platform
7. Stabiliser to be securely fixed
to the podium by tightening the
palm wheel and coupler.
To Next Page
Loading...