BPW D-51674 - Page 16

9
2
2
3
1
5
4
BPW SWING, BPW SWING Vtec
BPW RONDO, BPW RONDO Vtec
1
2
2
3
1
5
4
8
BPW Rubber suspension axles / Torsion bar axles
Lubrication and maintenace work
For detailed description see pages 10  15
Lubricate
Maintenance work
Lubricate
1 In the case of torsion bar axles: lubricate the
trailing arm bearing via the grease nipple.
2 Change wheel hub bearing grease
1)
(does not apply to compact bearings).
Maintenance work
1 Check wheel bolts for firm seating.
2 Check brake play. If necessary, readjust.
3 Check brake lining wear.
4 Check lateral play of wheel bearing.
If necessary, readjust.
Compact bearings
Conventional bearings
5 Check hub caps for firm seating.
– Check tyres for uneven wear.
1)
In the case of boat trailer axles with the "Water Proof" marking on the hub caps,
this is not necessary after each immersion.
After 2 years Every 5,000 kilometrs or annually Every 2,000  3,000 kilometres or annually After 500 kilometres Initially
English