The Lupin Table Lamp, identified by style number 6002142, is a sculptural lighting fixture designed for indoor use. It features a cast-aluminum lamp base with a hand-applied bronze finish, giving it a rustic texture and clean lines. The lamp comes with a lampshade and a fabric cord equipped with a rocker switch for easy operation.
Technical Specifications:
- Dimensions:
- Height: 21 inches
- Base Width: 7.5 inches square
- Shade Diameter: 18 inches
- Weight: 15.5 lbs.
- Electrical Rating:
- Maximum Wattage: 60 Watt (incandescent) OR 9 Watt (LED)
- Bulb Type: Type A (bulbs not included)
- Material: Cast Aluminum
- Origin: Made in India
Usage Features:
The Lupin Table Lamp is designed for straightforward assembly and operation. It is compatible with both incandescent and LED Type A bulbs, offering flexibility in lighting choice. The lamp is also dimmer-switch compatible, allowing users to adjust the light intensity to suit their needs. The rocker switch on the fabric cord provides convenient on/off control.
Assembly Instructions:
- Unpacking: Carefully remove all parts from the box and discard all plastic coverings.
- Harp Insertion: Insert the harp (C) into the saddle (B), which is pre-attached to the lamp base.
- Bulb Installation: Insert an LED bulb (not included) into the socket.
- Finial Removal: Remove the finial (E) by unscrewing it in a counterclockwise direction.
- Shade Placement: Place the lampshade onto the finial screw plate (D).
- Finial Reattachment: Reattach the finial (E) and tighten it by screwing in a clockwise direction to secure the shade.
- Power Connection & Test: Plug the lamp into a proper electrical outlet and test its functionality by turning it on.
- Completion: Assembly is complete.
Parts Enclosed:
- (A) Lamp Base (1)
- (B) Saddle (1) (attached on lamp base)
- (C) Harp (1)
- (D) Finial Screw Plate (1) (attached on harp)
- (E) Finial (1)
Maintenance Features:
- Cleaning: Dust the lamp regularly with a soft, dry cloth to maintain its appearance.
- Avoid Harsh Cleaners: Do not use harsh cleaners or abrasives, as these can damage the finish of the lamp.
- Bulb Replacement: When replacing the lightbulb, always turn off the lamp and allow it to cool down to prevent the risk of electrical shock or burns.
Important Safety Instructions:
- Read Instructions: Always read and follow the assembly instructions closely. Improper assembly or installation can lead to personal injury or property damage.
- Wattage Limit: Do not exceed the recommended wattage (60 Watt incandescent or 9 Watt LED) to avoid the risk of fire.
- Wiring: All wires are connected. Exercise caution when unpacking to avoid pulling wires, which could cause damage. Do not connect the lamp to electricity until it is fully assembled.
- Hot Bulb: Do not touch or look directly at the bulb when the lamp is illuminated.
- Flammable Materials: Keep flammable materials away from the lit bulb.
- Strangulation Hazard: Keep the lamp cord at least 3 feet away from cribs, bassinets, and toddler beds. Ensure it is out of reach of children under 3 years of age.
- Not a Toy: This product is not a toy and has no play value.
Need help?
General
To Next Page