EN
BRAINZ FAST CHARGER POWERBANK DON
INSTRUCTION MANUAL
PLEASE READ THE INSTRUCTIONS CAREFULLY
AND KEEP THEM FOR FUTURE REFERENCE
What you need
• USB-C Cable (included)
• USB Adapter or USB Power Supply (not included)
• Mobile device
Charging the powerbank
Fully charge the powerbank, using the included USB-C cable. When the powerbank is charging, the last digit of the
battery percentage will flash. Once fully charged, the powerbank will indicate 100%.
Device charging
Make sure the powerbank is fully charged. The powerbank has 4 different outputs: micro-USB, USB-C, Lightning
and USB. Connect the desired device to the powerbank by matching the appropriate output to the device.
Battery percentage
To see the battery percentage, briefly press the button on the side of the powerbank once. Repeat to turn it off
again.
Flashlight
Press and hold the button on the side of the powerbank for 4 seconds to activate the torch. Repeat to turn it off
again.
Caution:
Do not use a charger with a higher voltage than suitable for this product.
This manual is valid for article number 38633.
For more information about this product, please visit www.brainz-electronics.nl
To Next Page
Need help?
General
