Need help?Do you have a question about the Branch Ergonomic Chair and is the answer not in the manual?
General| Category | Indoor Furnishing |
|---|---|
| Type | Ergonomic Chair |
| Seat Width | 19.5 inches |
| Tilt Lock | Yes |
| Lumbar Support | Adjustable |
| Armrest Adjustment | Height adjustable |
| Adjustability | Seat height, armrest height, tilt tension |
| Color Options | Black, Gray |
Insert casters into the 5-star base and attach the cylinder.
Connect the backrest and mechanism using back bolts and washers.
Insert the assembled chair frame into the cylinder on the base.
Attach armrests to the seat using armrest bolts and pre-inserted hex nuts.
Slide the seat onto the chair frame and ensure it clicks to secure.
Attach the headrest to the chair back frame using screws.
Learn how to adjust the seat height using the paddle-shaped lever.
Understand how to recline, lock, and return the chair to an upright position.
Adjust the width of the armrests by pulling and pushing levers.
Raise or lower armrests by holding a button under each armrest.
Slide the top of the armrest forward or backward to adjust depth.
Adjust seat depth by pulling a lever and sliding the seat forward or back.
Modify lumbar support height by using handles on the back of the chair.
Adjust tilt tension by turning a dial located below the seat.
To Next Page