! INSTALLATION!INSTRUCTIONS!
5000-CA14 instructions 7-15-2016 Page 1 of 4 GS
Curb Alert Parking Sensor for Corvette C7
(Kit # 5000-CA14)
Please read thoroughly before starting installation and check that kit contents are complete.
Main module
Buzzer/speaker
Front IR sensor
3M cleaning pad
Zip ties
Allen wrench
4 different mounts for IR sensor
6 wire guides/clamps
2 ringlets and nuts (attached to power harness)
Inline fuse holder (attached to power harness)
These instructions
Safety Precautions:
• Work in well ventilated area that is clear of obstructions.
• Secure vehicle with tire chucks in both front and rear of tires.
• Turn vehicle accessories OFF and ensure ignition key is in OFF position.
• Wear safety goggles and snug fitting clothes.
• Use tools only for their intended purpose and which are in good repair.
• Only perform this task if confidence, skill, and physical ability permit.
NOTE: We strive to provide accurate and up-to-date installation instructions. For the latest full color
instructions, as well as an installation video, please visit www.brandmotion.com
To Next Page
Need help?
General
