Branx Fitness ELITE RUNNER PRO BF-ER-5088S-TR User Manual

Branx Fitness ELITE RUNNER PRO BF-ER-5088S-TR

19 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

www.branxtness.co.uk/productsupport

BRANX FITNESS ELITE RUNNER PRO

BF-ER-5088S-TR TREADMILL

USER MANUAL

Product may vary slightly from the item pictured due to model upgrades.

Before using this product, it is essential you read this ENTIRE user manual and ALL installation instructions.

It describes equipment setup and instructs you on how to use it correctly and safely.

This treadmill is for (Home): Domestic use only.Branx Fitness equipment is NOT certied for use with

pacemakers.

NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our website

at www.branxtness.co.uk

Table of Contents

Questions and Answers:

N
Natalie PenaAug 3, 2025
What to do if my Branx Fitness Treadmill will not start?
- J
  Joshua DouglasAug 3, 2025
  If your Branx Fitness Treadmill won't start, there are several potential causes. Ensure the treadmill is properly plugged into a suitable outlet and that the safety key is correctly attached. Check if the treadmill's circuit breaker has tripped and reset it if necessary. Also, verify that the On/Off switch is turned on. As a final step, you may try to unplug and then re-plug the electrical cord.
G
greenandrewAug 11, 2025
Why is the pulse rate inaccurate on my Branx Fitness Treadmill?
- R
  robertsonjustinAug 11, 2025
  If the pulse rate on your Branx Fitness Treadmill is inaccurate, several factors could be the cause. Excessive hand movement, overly wet palms, gripping the hand grips too tightly, or wearing rings can all interfere with accurate readings. Try standing on the side rails to get an accurate pulse reading, dry your palms, use moderate pressure when gripping, and remove any rings.
M
milesrichardAug 18, 2025
How to fix a slipping belt on my Branx Fitness Treadmill?
- L
  Leslie NguyenAug 18, 2025
  A slipping belt on your Branx Fitness Treadmill can typically be attributed to a walking belt that is too loose or a deck that requires lubrication. You can try tightening the walking belt or lubricating the belt and deck.

Branx Fitness ELITE RUNNER PRO BF-ER-5088S-TR Specifications

General

Brand	Branx Fitness
Model	ELITE RUNNER PRO BF-ER-5088S-TR
Category	Treadmill
Language	English

Summary

Important Precautions

General Safety Precautions

Essential safety instructions and warnings for treadmill operation and user responsibility.

Critical Safety Warnings

Urgent advisories regarding exercise programs, physician consultation, and product liability.

Parts List and Assembly

Treadmill Assembly Instructions

Step-by-step guide for assembling the treadmill, including safety precautions and lifting advice.

Operation and System Functions

Power Cord Connection

Console Operation and Controls

Detailed explanation of the treadmill console features, buttons, displays, and basic operation.

Computer Functionality Overview

Maintenance and Care

Lubrication and Belt Tension

Troubleshooting and Support

Common Troubleshooting Issues

Table detailing common problems, their causes, and solutions for the treadmill.

Console Error Codes and Troubleshooting

Explanation of console error messages and general troubleshooting advice.

Warranty Terms and Service

Related product manuals

Preview: Branx Fitness CARDIO PRO 4400

Branx Fitness CARDIO PRO 4400