BRASH IMPORTS 3000 - User Manual

Questions and Answers

K
Kimberly GarciaJul 27, 2025
What to do if the battery icon is on for BRASH IMPORTS Blood Pressure Monitor?
- M
  matthew40Jul 27, 2025
  If the battery icon is on, it means the battery has low power. Replace the battery and measure again.
K
kristina47Jul 31, 2025
Why nothing is displayed when I push the POWER button on my BRASH IMPORTS 3000?
- J
  John WileyJul 31, 2025
  If nothing is displayed when you push the POWER button or the battery icon flashes on your BRASH IMPORTS Blood Pressure Monitor, it could be due to no battery installation, worn-out batteries, or incorrect battery polarity. Insert batteries, replace them with new ones, or insert the battery with the correct polarities.
R
riddlekelseyAug 4, 2025
What to do if my BRASH IMPORTS 3000 shows E4 error?
- H
  hhillAug 5, 2025
  If your BRASH IMPORTS Blood Pressure Monitor displays E4, it means you were shaking during the measurement. Keep still and maintain the correct posture, then measure again.
A
afosterAug 8, 2025
What does E2 error mean on BRASH IMPORTS Blood Pressure Monitor?
- C
  Courtney SmithAug 8, 2025
  If your BRASH IMPORTS Blood Pressure Monitor displays E2, E7, E8, or E9, it indicates a measurement failure. This can happen if the wrist cuff is not properly adjusted or placed, or if your hand or body is shaking. Readjust the wrist cuff position and tightness, and keep your hand still.
L
Lorraine PerezAug 12, 2025
What does E5 error mean on BRASH IMPORTS 3000 Blood Pressure Monitor?
- B
  Benjamin NelsonAug 12, 2025
  If your BRASH IMPORTS Blood Pressure Monitor displays E5 or E6, it means the pressure is being released too fast or too slow automatically. This is likely due to the cuff being either too tight or too loose. Readjust the cuff and measure again.
A
Anita PachecoAug 17, 2025
What does E1 error mean on BRASH IMPORTS Blood Pressure Monitor?
- R
  Robert BakerAug 17, 2025
  If your BRASH IMPORTS Blood Pressure Monitor displays E1, it means it can't normally increase pressure. Check your cuff for any air leakage and replace the wrist cuff with a new one.
L
lisa07Aug 21, 2025
What does E3 error mean on BRASH IMPORTS 3000 Blood Pressure Monitor?
- D
  Donald WilliamsonAug 21, 2025
  If your BRASH IMPORTS Blood Pressure Monitor displays E3, it means the inflation pressure is too high. Re-measure or send it back to the dealer for pressure recalibration.