8
Next, switch off the shaver, remove the shaver Foil & Cutter cassette (1)
and let it dry.
If you regularly clean the shaver under water, then once a week apply a
drop of light machine oil onto the long hair trimmer (2) and shaver
Foil & Cutter cassette (1) (picture).
Alternatively, you may clean the shaver using a brush:
Switch off the shaver. Remove the shaver Foil & Cutter cassette and tap
it out on a flat surface.
Using a brush, clean the inner area of the shaver head. However, do not
clean the shaver Foil & Cutter cassette with a brush as this may damage it
(picture).
Keeping your shaver in top shape
To maintain 100% shaving performance, replace the shaver Foil & Cutter
cassette (1) at least every 18 months or when worn.
Foil & Cutter cassette: 32B
Preserving the batteries
In order to maintain the optimum capacity of the rechargeable batteries, the
shaver has to be fully discharged (by shaving) every 6 months approximately.
Then recharge the shaver to full capacity.
Environmental notice
This product contains rechargeable batteries. In the interest of
protecting the environment, please do not dispose of the product in
the household waste at the end of its useful life. Disposal can take
place at a Braun Service Centre or at appropriate collection sites
provided in your country.
Subject to change without notice.
This product conforms to the European Directives EMC 2004/108/EC
and Low Voltage 2006/95/EC.
For electric specifications, see printing on the special cord set.
•
•
•
•
98727826_Floater340_wet_S6-60.in8 898727826_Floater340_wet_S6-60.in8 8 05.06.2008 9:31:16 Uhr05.06.2008 9:31:16 Uhr
To Next Page
Loading...
Need help?
General
