EasyManua.ls Logo

Braun 790cc-7 LDE - Cleaning; Automatic cleaning; Manual cleaning

Braun 790cc-7 LDE
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
Cleaning
Automatic cleaning
After each shave, return the shaver to the
Clean&Renew station and proceed as described
above in the section «Before shaving». All charging
and cleaning needs are then automatically taken
care of. With daily use, a cleaning cartridge should
be suffi cient for about 30 cleaning cycles.
The hygienic cleaning cartridge contains alcohol,
which once opened will naturally evaporate
slowly into the surrounding air. Each cartridge,
if not used daily, should be replaced after
approximately 8 weeks.
The cleaning cartridge also contains lubricants,
which may leave residual marks on the outer foil
frame after cleaning. However, these marks can
be removed easily by wiping gently with a cloth
or soft tissue paper.
Manual cleaning
Rinsing the shaver head under running water
is an alternative way to keep the shaver clean,
especially when travelling:
Switch the shaver on (cordless)
w
and rinse
the shaving head under hot running water until
all residues have been removed. You may use
liquid soap without abrasive substances. Rinse
off all foam and let the shaver run for a few
more seconds.
Next, switch off the shaver, press the release
button 9 to remove the Foil & Cutter cassette
8 and let it dry.
If you regularly clean the shaver under water,
apply a drop of light machine oil onto the
shaver foil and long hair trimmer. This is critical
for proper functioning of the shaver as washing
under water can lead to removal of lubricants
from the shaver’s cutting parts leading to
higher friction in the shaver. This may result
in the battery running out faster than normal.
Even if this happens – indicated by low charge
indicator lighting up earlier, your Braun shaver
will run for at least 5 more minutes enabling
you to complete your current shave.
Alternatively, you may clean the shaver with a
brush:
Switch off the shaver. Remove the Foil & Cutter
cassette
8 and tap it out on a fl at surface.
Using the brush, clean the inner area of the
pivoting head. However, do not clean the
cassette with the brush as this may damage it.
trimmer
oil
huile
trimmer
er
re
le
a
s
e
trimmer
re
le
a
s
e
re
le
a
s
e
Series 7
Series 7
Series
Series
click!
re
le
a
s
e
re
le
a
s
e
re
le
a
s
e
Series 7
Series 7
90697350_790cc-7_LDE_Japan.indd 29 09.12.15 14:37
CSS APPROVED Effective Date 17Dec2015 GMT - Printed 31Mar2016 Page 29 of 36

Related product manuals