Braun Acculan 3Ti - User Manual

Other manuals for Braun Acculan 3Ti

Instructions For Use/Technical Description250 pages

Questions and Answers

G
glendawongAug 3, 2025
Why is the dermatome blade on my Braun Acculan 3Ti Pet Care Product not cutting well?
- M
  Mr. Jason RichAug 3, 2025
  If your Braun Pet Care Product's dermatome blade isn't cutting well, several factors could be at play. First, the dermatome blade may be dull and needs replacement. Alternatively, the battery might be low, requiring a charge. If charging doesn't resolve the issue, the battery itself could be faulty and require replacement. Finally, the dermatome may be out of adjustment, in which case you should have the device repaired by the manufacturer.
D
Dr. Laura Shelton MDAug 10, 2025
What to do if the dermatome blade on my Braun Pet Care Product is not moving?
- T
  Tyler FoxAug 10, 2025
  If the dermatome blade on your Braun Pet Care Product isn't moving, it's likely due to defective gearing. In this case, you should have the device repaired by the manufacturer.
D
Denise HartAug 18, 2025
What to do if my Braun Medical Equipment tool is not moving?
- J
  Jesus ValenzuelaAug 18, 2025
  If your Braun Medical Equipment tool isn't moving, it could be due to a few reasons. First, ensure the attachment is correctly coupled. If not, couple the attachment correctly. If the attachment is correctly coupled, the gearing may be defective, and the product should be repaired by the manufacturer. It is also possible that the cause is not mentioned, in this case the product should be repaired by the manufacturer.
J
Jerome KhanAug 26, 2025
Why is my Braun Medical Equipment making a loud noise?
- B
  batesdanielleAug 26, 2025
  If your Braun Medical Equipment is making a loud noise, it's likely due to defective gearing. In this case, have the product repaired by the manufacturer.