Braun BP 1650 - Page 7

7
• Hold the monitor at heart level
.
• Wait approximately 3 minutes before repeating a
measurement.
Taking a measurement
1. Fasten the monitor on the palm side of your wrist,
roughly 2 cm below the palm line.
Make sure that the cuff (G) fits tightly.
2. Press the red start/stop button (D).
3. Hold the monitor at heart level
.
The measurement starts automatically. While measure-
ment is in progress, do not move or speak.
2 cm
SYS
mm Hg
mm Hg
DIA
memo
6073432_BP1650_AMEE_4-84 Seite 7 Donnerstag, 4. Januar 2007 10:44 10