17
4 On/off button
5 Charging indicator
6 Power socket
7 Special cord set (design can differ)
For electric specifications, see printing on the special cord set.
Charging
Recommended ambient temperature for charging is 5 °C to 35 °C.
The battery may not charge properly or at all under extreme low or high
temperatures. Recommended ambient temperature for trimming is 15 °C to
35 °C. Do not expose the appliance to temperatures higher than 50 °C for
extended periods of time.
• Connect the appliance via the special cord set (7) to an electrical outlet.
• A full charge takes approx. 8 hours and provides up to 60 minutes of
cordless operation time.
• The charging indicator (5) shows that the appliance is being charged.
When the battery is fully charged, the charging indicator turns off.
• Once the appliance is completely charged, discharge it through normal
use. Then recharge again to full capacity.
Usage
• Exchange the attachments only when the appliance is switched off.
• Place one of the precision combs (1a, 1b) over the trimmer head (2).
Beard Trimming / Hair Clipping
• Turn the length selector (3) to your desired cutting length. The comb
slides automatically up or down.
• Length settings precision beard comb (1a): 1 to 10 mm in 0,5 mm steps
• Length settings precision hair comb (1b): 11 to 20 mm in 0,5 mm steps
• Push the on/off button (4) to turn the appliance on.
• Trim against hair growth by guiding the flat comb part over the skin.
• Avoid clogging the comb with hair. Remove and clean it from time to time.
Precision and Contour Trimming
• For shaping sideburns, moustaches and partial short beards, use the
trimmer head (2) without precision comb.
90835164_BT3040_Japan.indd 1790835164_BT3040_Japan.indd 17 26.04.16 15:1026.04.16 15:10
CSS APPROVED Effective Date 28Apr2016 GMT - Printed 30Jun2016 Page 17 of 20
To Next Page
Loading...
