5704 - 5
BINC Rev: 11/97 Service Documentation
Service Information
BAG Rev: 8/97 5704
Maintenance of the The device is provided with automatic battery maintenance,
battery i.e. it discharges automatically once a year in order to
regain the full battery capacity. This process takes approx.
7 hours.
Disposal of the battery Opening the shaver, described hereafter, destroys the device
and has only to be done at the end of the device's lifetime.
The cord socket (29) is provided with a screw mechanism
to ensure easy recycling. Open the housing by piercing and
turning the mechanism (e.g. with a coin). Now, the batteries
can be removed and orderly disposed.
Technical details
Voltage range 12 - 240 V
Charging time from 100 V upwards: approx. 1 hour,
at 12 V: approx. 20 hours;
when completely discharged: at least 4 hours.
Power consumption approx. 5 Watts.
Cutter block amplitude 2.8 mm.
Number of revolutions with after a minimum of 3 minutes charging time.
operating battery
only cutter block min. 6900 rev./min.
max. 8500 rev./min.
with long hair trimmer min. 6600 rev./min.
Operating capacity after full approx. 60 shaving minutes.
recharge
Note: Before dismantling the unit, carry out the "electronics-reset and test" analysis which is
described on pages 9-10.
To Next Page
Loading...
