To Next PageTo Next PageWhat to do if the Braun Epilator power bars do not light up?
If the power bars on your Braun Epilator don't light up when the treatment window is placed on your skin, make sure the device is properly connected to an electrical outlet and is in Ready mode. Also, ensure that both skin tone sensors are making full contact with your skin. If necessary, adjust the device's position to ensure both sensors are in contact with the skin.
Why first LED on my Braun Epilator power bars illuminates red?
If the first LED on the power bar of your Braun Epilator illuminates red, it indicates an invalid skin tone reading, meaning your skin is too dark. For safety reasons, the device cannot be activated in this condition.
What to do if my Braun Epilator doesn’t work on small areas?
If your Braun Epilator isn't working on small areas, it's likely because both skin tone sensors need to be in contact with the skin for the device to operate. If the area you're trying to treat is too small or curved, a valid skin tone reading might not be possible, preventing activation. Try repositioning the device to ensure both sensors make contact with the skin.
What does it mean if all white LEDs flash on my Braun Gillette Venus SILK-EXPERT 3 BD3001 Epilator?
If all the white LEDs on your Braun Epilator are flashing, it signifies the end of the product's lifetime, meaning the maximum number of flashes (250,000) has been reached.
What does it mean if the first LED on Braun Gillette Venus SILK-EXPERT 3 BD3001 Epilator power bars flashes white?
If the first LED on the power bars of your Braun Epilator is flashing white, it indicates that the device has entered STANDBY mode. To reactivate it, simply press any button.
Why first LED on my Braun Gillette Venus SILK-EXPERT 3 BD3001 Epilator power bars flashes red?
If the first LED on the power bars of your Braun Epilator is flashing red, it means the removable front has been taken off. Replace it to resume operation.
What to do if the power bars on my Braun Gillette Venus SILK-EXPERT 3 BD3001 Epilator show an unfamiliar pattern?
If the power bars on your Braun Epilator display an unfamiliar pattern of one red LED shining along with individual white LEDs, it indicates a device error. The device will not operate. Remove and replace the power supply connection. If the error persists, contact a Braun Service Center for repair.
Details the immediate and long-term results after IPL treatment, including hair regrowth patterns.
Lists conditions and skin types for which the device should not be used to ensure safety.
Covers eye safety and electrical/fire safety precautions for the device.
Details general safety, skin peel considerations, photosensitivity, and child safety.
Specifies recommended and cautioned body areas for women and men.
Defines suitable skin tones for the device, up to tone V.
States the device is most effective on naturally black or brown hair.
Enables fast, efficient treatments for large skin surface areas like legs and arms.
For sensitive or small, hard-to-reach areas like knees, ankles, and bikini line.
Reduces light intensity for sensitive areas or first-time users.
Provides a one-year limited warranty for the device in the US.
Covers defects in material and workmanship for one year in Canada.
General