6
Charge indicator
Type 5429
• The charge indicator integrated in the on/off switch (4) shows the battery
status.
• The charge indicator blinks green when the appliance is being charged.
When the battery is fully charged, the charge indicator shines
permanently green provided the appliance is connected to an electrical
outlet.
• During cordless use the charge indicator blinks green.
• The charge indicator flashes red when the battery is running low.
You should be able to finish your current trimming sequence.
Type 5427
• The charge indicator (4) shows that the appliance is being charged.
When the battery is fully charged, the charge indicator turns off.
General hair cutting information
• The hair should be clean, well combed, tangle-free and dry.
• If you are not used to clipping hair, begin with a higher setting and then
reduce the setting to avoid cutting more hair than desired.
• Use a slow and controlled movement. Do not force the clipper through
the hair faster than the clipper can cut it.
• In between, shake or blow off the hair from the clipper. If too much hair is
caught in the distance comb, remove it.
• To control your progress during clipping, regularly comb the hair in the
style desired.
Hair cutting
Hair cutting with hair clipping comb
• Place the hair clipping comb (1a/1b) on the appliance with the appliance
turned off.
• Press the length selector (3) and slide the hair comb up to your desired
hair length. Possible length settings (mm):
Long hair clipping comb (1a) = 14 / 17 / 20 / 23 / 26 / 29 / 32 / 35
Short hair clipping comb (1b) = 3 / 6 / 9 / 12 / 15 / 18 / 21 / 24
• Turn the appliance on by pressing the on/off switch (4) and cut hair to the
desired length.
90306868_Hair_Clipper_Type_5429_5427_CEEMEA.indd 690306868_Hair_Clipper_Type_5429_5427_CEEMEA.indd 6 15.07.22 10:4815.07.22 10:48
To Next Page
Loading...
Need help?
General
Weight and Dimensions
