2. This model stores the last 9 temperature measurements.
To display the stored measurement, the thermometer must be turned on.
3. Press the Mem button.
The display shows the temperature, and when releasing the Mem button, the stored temperature for that memory
number is displayed, together with “M”.
4. Each time the Mem button is pushed, the stored reading and an M is displayed to indicate each temperature
measurement (eg. M2).
Memory mode is automatically exited by not pressing the memory button for 5 seconds.
Night light feature
This thermometer includes a convenient night light to illuminate the display in a dim environment.
The light will turn on when you press any button. It will stay on until the thermometer is inactive for up to 15 seconds even
after temperature is taken.
Changing the temperature scale
To Next Page
Loading...
