11
Cleaning the epilation head
5 After epilating, unplug the appliance
and clean the epilation head:
Remove the clip and clean it with the
brush.
6 To clean the tweezer element, use the
cleaning brush dipped into alcohol.
Turn the product around and clean the
tweezers with the brush while turning
the barrel manually.
7 Remove the epilation head by pressing
the release buttons on the left and
right and pull it off.
Give the top of the housing a quick
clean with the brush. Place the epilation
head and clip back on the
housing.
Subject to change without notice.
This product conforms to the
European Directives EMC
2004/108/EC and Low Voltage
2006/95/EC.
Please do not dispose of the
product in the household waste at
the end of its useful life. Disposal
can take place at a Braun Service
Centre or at appropriate collection
points provided in your country.
1
3
2 1
99251900_SE3170_MN_S6- Seite 11 Mittwoch, 2. September 2009 2:23 14
To Next Page
Loading...
