6 7
How to use your Braun ThermoScan
1. To achieve accurate
measurements, make sure a
new, clean lens lter (2) is in
place before each
measurement.
2. Gently squeeze the opposite
ends of the thermometer
to pull o the probe cap (1).
Do not use force in removing
the cap.
3. To turn the thermometer on,
push the «start» button (4).
During an internal self-
check, the display shows
all segments.
The thermometer is ready to use
after two beeps are sounded and this
display appears.
4. Perform an ear tug to straighten the ear canal.
This gives the thermometer a clear view of the eardrum.
An ear tug is best performed by using your free hand to grasp
the outer edge of the top half of the ear. To take your own
temperature, wrap your free hand around the back of your
head and tug your ear from behind.
Children under 1 year:
Pull the ear
straight back.
Children aged 1 year to
adult: Pull the ear
up and back.
5. While tugging the ear,
t the probe (3) snugly
into the ear canal, then
push the «start» button
(4).
After one second a beep will signal
the end of the measuring process,
the result is shown on the display (6).
After 2 short beeps, the ear symbol will stop
ashing.
6. For the next measurement,
remove the used lens lter
and put on a new, clean lens
lter by snapping into position.
Fit the probe snugly into the ear canal, then
push the «start» button.
The Braun ThermoScan ear thermometer turns o automatically after
60 seconds of inactivity.
To Next Page
Loading...
