EasyManua.ls Logo

Braun ThermoScan IRT 6020 - Night light feature; Night Light Functionality; How to change temperature between °F and °C; Changing Temperature Scale

Braun ThermoScan IRT 6020
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
ThermoScan
1
2
3
To protect the environment, dispose of the product and empty batteries
at your retail store or at appropriate collection sites according to
national or local regulations.
Do not mix alkaline, standard, or rechargeable batteries.
3
1
2
Available only in
IRT6510
IRT6030
Night light feature
This thermometer includes a convenient night light to
illuminate the display in a dim environment.
The light will turn on when you press any button. It will stay
on until the thermometer is inactive for up to 15 seconds
even after temperature is taken.
How to change temperature between °F and °C
If you wish to change the temperature scale of your thermometer:
Make sure the thermometer is turned o.
Press and hold down the Power button
. After about 3 seconds
the display will show this sequence: ° C / SET / ° F / SET.
Release the Power button
when the desired temperature scale is shown.
There will be a short beep to conrm the new setting, then the thermometer
is turned o automatically.
Care and cleaning
The probe tip is the most delicate part of the thermometer. It must be clean and
intact to ensure accurate readings. If the thermometer is ever accidentally used
without a hygienic lens lter, clean the probe tip as follows:
Very gently wipe the surface with a cotton swab or soft cloth moistened with
alcohol. After the alcohol has completely dried out, you can put a new hygienic
lens lter on and take a temperature measurement.
If the probe tip is damaged, please contact Consumer Relations.
Use a soft, dry cloth to clean the thermometer display and exterior. Do not use
abrasive cleaners. Never submerge this thermometer in water or any other liquid.
Store thermometer and hygienic lens lters in a dry location free from dust and
contamination and away from direct sunlight.
Additional lens lters (LF 40) are available at most stores carrying Braun ThermoScan.
Replacing the batteries
The thermometer is supplied with two 1.5 V type AA (LR06) batteries.
For best performance, we recommend Duracell
®
alkaline batteries.
Insert new batteries when the battery symbol appears on the display.
Open the battery compartment. Remove the batteries and replace with
new batteries, making sure the poles are in the right direction.
Snap battery door into place.
15 sec
15 sec

Related product manuals