5
English
The lens lter indicator will
blink to signal one is needed.
To achieve accurate
measurements, make sure a
new, clean hygienic lens lter
is in place before each
measurement.
Attach a new lens lter by pushing the thermometer probe straight into the hygienic lens lter
inside the box and then pulling out.
Note: The Braun ThermoScan will not work unless a lens lter is attached.
The thermometer is ready to take a temperature when the display looks like the images below.
How does Braun ThermoScan work?
Braun ThermoScan measures the infrared heat generated by the eardrum and
surrounding tissues. When placed in the ear, Braun ThermoScan continuously
monitors the infrared energy and the ExactTemp
®
Stability Indicator displays
a reading only if the thermometer detects that an accurate and stable
temperature measurement has been taken.
How to use your Braun ThermoScan
Remove
protective
cap.
IRT6020
Remove the
thermometer
from the
storage cradle
IRT6030
IRT6500
IRT6510
Push the Power button .
During an internal self-check, the display shows all
segments. Then the last temperature taken will be
displayed for 5 seconds.
1
2
3
To Next Page
Loading...
