Security Function
1. When the security function is enabled, an unlocked icon
is displayed next to the battery indicator during normal
use to show that the security function is active.
2. When the device is within 60 minutes of the time limit a
countdown clock showing the number of minutes
remaining next to the unlocked icon. At 5 minutes prior to
expiration the thermometer will begin to beep once per
minute and the unlocked icon will flash
3. Upon expiration of the time limit, the unlocked icon and
countdown timer will be replaced with the locked icon
and the thermometer will beep once every 5 minutes to
indicate locked state. Unlock the thermometer by
returning it to the charging station.
NOTE: Requires Charging Station and Service Tool software
Set up done by BioMedical Engineering
To Previous Page
Loading...
