35
CLEAN&CHARGE STATION
Cleaning does
not start when
pressing the
start button.
1. Shaver is not placed
properly in the
Clean&Charge Station.
2. Cleaning cartridge
contains not enough
cleaning fluid (display
blinks red).
1. Insert shaver into the Clean&Charge
Station and push it to the rear side of
the station (contacts of the shaver
need to align with contacts in the
station).
2. Insert new cleaning cartridge.
Press start button again.
Increased
consumption of
cleaning fluid.
Drain of the Clean&
Charge station is
clogged.
– Clean the drain with a wooden
toothpick.
– Regularly wipe the tub clean.
90725907_Series_5-2_w&d_Japan.indd 3590725907_Series_5-2_w&d_Japan.indd 35 13.06.19 14:2213.06.19 14:22
Business Use - P&G AUTHORIZED POA-00139891 Rev 001 Effective Date 2019-06-19 Printed 2022-12-14 Page 35 of 40
To Next Page
Loading...
