Braven BZ600gba - Device Operation and Controls; Phone;Pair Button (MFB) Functions; Volume Up Button Functions

Phone/Pair
Button(MFB)
Press for 5 seconds = GO INTO
PAIRING MODE
Press for 0.5 second = PICK UP CALL
(when incoming call)
After pairing success and playing
music .The music will be paused if
pressed for 0.5 seconds to 5
seconds .The music will be
p
la
y
in
g
PAIRING - Press answer button for 5 seconds to go into pairing mode
.White LED will be flashes 1 time every 0.4 seconds.
PAIRED (CONNECTED): White LED will be flashes 1 time every 5
seconds .There is a sound at the same time when connection is made.
INCOMING CALL -Press answer button to answer call. The white LED
will be flashes 2 times every 2 seconds when on the phone
END CALL-Press answer button to end call. It will go back common
state .White LED will be flashes 1 time every 5 seconds
REJECT CALL - When there is a coming call ,If someone doesn't want
to answer the call,Long press answer button for 3 seconds to reject call.
Then it will go back to common state .White LED will be flashes 1 time
every 5 seconds
MUTE
-
When on the phone. Press and hold answer button for 3 seconds
Volume Up Button
Increase Volume
seconds
.The
music
will
be
playing
again if pressed for 0.5 seconds to 5
seconds.
As soon as button is pressed = Volume increase one increment there are
16 increments
Press and hold for 2 seconds = To next song
At maximum volume = have a beep at maximum volume.
MUTE
When
on
the
phone
.
Press
and
hold
answer
button
for
3
seconds
could be mute the call .And Press and hold answer button for 3 seconds
again will be back on the phone.
RESET-In pairing mode. Press and hold the answer button for 5 seconds
to clear the previous pairing information LED lights up solid 2 seconds to
confirm memory cleared. Then returns to pairing mode, and light flashes
ever
y
.4 sec.