BRAYER BR1093WH - Page 3

3
EN
THERMOPOT BR1093WH
Thermopot is intended for boiling water and
maintaining its temperature at a set level.
DESCRIPTION
1. Tray
2. Tray grid
3. Spout for pouring water
4. Indication/temperature selection panel
5. Control panel
6. Thermopot ask
7. Body
8. Power cord
9. Detachable lid
10. Lid lock handle
11. Steam release openings
Control panel
12. On/o󰀨/re-boil button «Start/re-boil»
13. Water temperature selection button «Temperature
selection»
14. Water dispense on button «Water dispense»
15. Lock on/o󰀨 button «Lock»
16. Switching on the water cooling mode «Quick
cooling»
ATTENTION!
For additional protection it is reasonable to install a
residual current device (RCD) with nominal operation
current not exceeding 30 mA into the mains. To install
RCD, contact a specialist.
EN
Indication/temperature selection panel
17. Stand-by mode symbol «
»
18. Symbols of modes:
- water boiling « »
- water for black tea brewing «
»
- water for co󰀨ee brewing «
»
- water for herbal tea brewing «
»
19. Water heating temperature digital symbols
20. Hot water keep warm mode digital symbols
21. Symbols of volume of water in the thermopot ask
«
», « », « »
22. Water cooling mode on symbol « »
23. Long boiling mode symbol «
»
24. Temperature mode setting buttons «-/+»
25. Water temperature setting symbol « »
26. Water temperature setting symbol « »
27. Water boiling mode symbol « »