BRAYER BR2401 - Page 9

9
EN
the button to switch the necessary operation mode on,
each touch of the button is accompanied by a sound
signal.
«Program» button (23) for choosing cooking
programs
• By pressing the «Program» button (23), you can
choose a cooking program, and the symbols
(29), «Rice», «Soup», «Pasta», «Meat», «Fish»,
«Vegetable», «Yogurt», «Cake» will light up and will be
ashing on the display.
• The digital symbols (31) will indicate the pressure
holding time, for example, when choosing the program
«Pasta», the digital symbols (31) will display the value
«P: 05», which means the pressure holding time is 5
minutes (pic. 6).
• Use the «
» buttons (26) to change the pressure
holding time.
• After choosing the pressure holding time, the
multicooker will turn on in 5 seconds.
«Keep warm/Cancel» button (24)
• To stop the cooking program, press the «Keep warm/
Cancel» button (24), the multicooker will be switched
to standby mode.
• When the multicooker is in standby mode, by pressing
the «Keep warm/Cancel» button (24) the keep warm
mode is activated, the digital symbols (31) will show
the time when the multicooker is operating in the keep
warm mode.
«Functions» button (25)
• By pressing the «Functions» button (25) you can choose
additional functions and cooking programs, and the
symbols (30) «Slow Cooke», «Steam», «Stew» , «Fry»
will light up and will be ashing on the display.
• After choosing the function and cooking program, the
multicooker will turn on in 5 seconds.
Buttons (26) for setting the pressure holding time/delay
time for the start of the cooking program « »
• By pressing the buttons (26) «
» you can set the
pressure holding time or the delay time for the start of
the cooking program.
«Timer» button (27)
• Before setting the delay time for the start of cooking,
press the «Program» button (23) to choose a cooking
program.
• Press the «Timer» button (27), digital symbols (31) will
display the time «00:00» and the setting time «hours»
«00» will be ashing.
• By pressing the buttons (26) «
», set the switch-on
delay time «hours», in 5 seconds the set time «hours»
will light constantly, and the digital symbols of the time
«minutes» «00» will be ashing.
• By pressing the buttons (26) « », set the switch-
on delay time «minutes», in 5 seconds the set time
«minutes» will light constantly.