BRAYER BR4802 - Page 3

3
EN
FAN HEATER BR4802
Fan heater is intended for the use as an additional
heating unit, for heating of small amenity room or its
certain area.
DESCRIPTION
1. Base
2. Air grid
3. Display
4. Control panel
5. Power switch «I/0»
6. Filter grid
7. Grid clamp
8. Carrying handle
Control panel (4)
9. On/O󰀨 button «
»
10. Body oscillation on button «
»
11. Operating mode selection touch-button «
»
12. Timer on/o󰀨 button «
»
Display (3)
13. Body oscillation mode symbol
14. Room temperature symbol
15. Timer on symbol
EN
ATTENTION!
– Portable fan heaters are intended for the use as
additional heating units, for heating of small amenity
room or its certain area. They are not intended for the
use as main heating units.
– For additional protection it is reasonable to install a
residual current device (RCD) with nominal operation
current not exceeding 30 mA. To install an RCD,
contact an electrical technician.
16. Temperature/timer operation time digital symbols
17. Ventilation mode symbol
18. Low power symbol
19. High power symbol
Remote control (25)
20. On/O󰀨 button «
»
21. Operating mode selection button «
»
22. Timer on/o󰀨 button «
»
23. Temperature setting buttons «
» and « »
24. Body oscillation on button «
»
25. Remote control
26. Battery holder