EasyManua.ls Logo

Breas iSleep 20 - Electrical Safety

Breas iSleep 20
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8 Safety Information
iSleep 20 clinician’s manual
Doc. 003923 En-Us V-2
2.2 Electrical Safety
Do not operate the iSleep 20 if it has a damaged power cord, power supply
or casing.
The iSleep 20 may not work properly if any part has been dropped, dam-
aged or submerged in water.
To avoid electrical shock, disconnect the electrical supply to the iSleep 20
before cleaning. Do not immerse the iSleep 20 into any fluids.
The operator shall not touch accessible contacts of connectors and the
patient simultaneously.
When handling the HA 01 humidifier, disconnect the iSleep 20 from any
power source.
If an external battery is used it must be disconnected when the iSleep 20 is
switched off. Otherwise the battery will discharge.
The performance of the iSleep 20 may deteriorate at:
AC supply voltage below -15% and above +10% of declared nominal
value.
DC supply voltage below -15% and above +25% of declared nominal
value.

Table of Contents

Related product manuals