Rapid date correction
Release the crown by turning it down-
wards (
▼
), then pull it to position 3
an turn it upwards (
▲
) until the exact
date appears in the window E.
Nota bene
Date corrections should never be
carried out when the watch shows
a time between 8pm and 1am. If
you are uncertain of the time shown
by the hands (whether it is am or pm),
move the hour and minute hands for-
wards (crown in position 4) up to
1am, after the date change. Then cor-
rect the date.
Chronograph functions
Push-piece I
starts and stops chronograph
Push-piece II
resets the chronograph and the
elapsed minute and hour registers to
zero
English
To Next Page
Loading...
