1514
II. MEASURING AN INTERRUPTED SHORT TIME
1. Press pushpiece A to start the chronograph. Hand 3
allows you to follow the measurement in seconds.
2. To interrupt the measurement, press pushpiece A
once more. To restart the time measurement, press
pushpiece A. This procedure makes it possible to
add several short times.
3. The chronograph is reset to zero by pressing push-
piece B, once the final measurement has
been stopped.
USING THE CHRONOGRAPH
I. M
EASURING A SINGLE SHORT TIME
1. Press pushpiece A to start the chronograph. Hand 3
shows the measurement in seconds.
2. Stop the measurement by pressing pushpiece A once
more. The measurement is done in hours (totalizer 1),
minutes (totalizer 2), seconds and
1
/
4
ths of a second
(hand 3).
3. Return the chronograph to zero by pressing push-
piece B.
To Next Page
Loading...
