Breitling ENDURANCE PRO - USING THE CHRONOGRAPH; MEASURING A SINGLE SHORT TIME

18 19
USING THE CHRONOGRAPH
I.
MEASURING A SINGLE SHORT TIME
1. Press pushpiece A to start the chronograph. Hand3 keeps track of
the measured time in seconds.
2. Stop the measurement by pressing pushpiece A once more. The
measurement is made in hours (totalizer1), minutes (hand 2),
seconds (hand 3) and
1
/
10
ths
of a second (totalizer 4).
3. Reset the chronograph to zero by pressing pushpieceB.
II.
MEASURING AN INTERRUPTED SHORT TIME
1. Press pushpiece A to start the chronograph. Hand3 shows the
measurement in seconds.
2. To interrupt the measurement, press pushpieceA once more.
To restart the time measurement, press pushpieceA. This
procedure makes it possible to add up several short times.
3. The chronograph is reset to zero by pressing pushpieceB,
once the fi nal measurement has been stopped.