These service instructions are intended for authorised bremer Cu-
stomer Service staff only!
The adjustments, repairs and maintenance work described in these
service instructions may only be carried out by qualified bremer ser-
vice engineers using original bremer spare parts!
Safety information in service instructions
Caution: Always de−energise the unit before opening it!
If, for some reason, the unit has to be put into operation when open,
please observe the following instructions:
WARNING! Risk of accident from electric shock!
Protect conductive parts against accidental contact, e.g. by covering
them with an insulating mat.
WARNING! Risk of crushing!
Beware moving parts, e.g. during functional tests
CAUTION! Destruction of components!
Do not place any conductive objects on printed circuit boards
No static discharge may take place via lifters!
To Next Page
Loading...