Brendon BBW30KLN - Machine Operation; Starting the Engine; Stopping the Engine

Page 6
Bowserwasher (Diesel)
Operating
Starting
Warning! Only use machine in a well
ventilated area
1. Open the Fuel Tank Valve -
move so it points down.
2. Move the throttle lever off the
stop position to low speed.
3. Push the starter button
4. Move the throttle lever 2 to the
right as machine becomes
warmer – To maximum run
position.
Stopping the Engine
1. Move your throttle lever to the far
left - off position – The Engine
will stop.
2. Move the fuel lever back to the
Horizontal off position.
3. Attention: Release the Pressure
Safely in the Gun & Lance.