Bresser MyTime Pro - Page 17

17
NOTE!
1. If no key is pressed for 30 seconds, it will exit the Manual
Time Setting Mode and go back to Time/Temperature
Display and the data updated.
2. During any setting mode, press and hold + or - for approx.
3 seconds for fast setting
3. View week of the day, press - key will toggle between the
day of week and the calendar week.
CALENDAR
1. To change the weekday display from one language to
another language, press and hold the - key for approx. 5
seconds and the display will be scrolled as below: (1) “GE”
for German (2) “FR” for French (3) “IT” for Italian (4) “ES”
for Spanish (5) “EN” for English
2. Releases the - key to confirm setting.
FOREIGN TIME SETTING
1. Press and hold + key for approx. 5 seconds, the icon
will turn on.
2.
Press and hold MODE for approx. 5 seconds in Foreign time
/Temperature. The digits for time are blinking and foreign
time can be set as described above by pressing + or - key.
3. Press MODE key again to confirm the setting of foreign time.
4. Press and hold + key for 3 seconds to choose between
local and foreign time display.
ALARM 1 SETTING
In the Alarm 1 Display [AL 1],
1. Press MODE for approx. 5 seconds: the hour digits are
blinking and can be set by pressing + or - key.
2. Press MODE again: the minute digits are blinking and can
be set by pressing + or - key.
3. Press MODE again: the alarm time is set and icon
will
turn on.
ALARM 2 SETTING
In the Alarm 2 Display [AL 2],
1. Press MODE for approx. 5 seconds: the hour digits are
blinking and can be set by pressing + or - key.
DE
GB
FR
IT
ES
Garantie / Warranty