BRIG Eagle 8 - Page 18

2022 Owner’s Manual Eagle 8 BRIG ltd
18
Step 5. Fill the two rear compartments to a nominal pressure of 0.2 bar (2.9 psi).
Check the air pressure in the front compartment. The pressure should be 0.2 bar (2.9 psi). Inflate / deflate if needed.
After completing the filling, close the Inflation valves with caps (1) (Fig. 4).
To deflate tube compartment, open the valve cap, press down on spindle (4) (Fig. 4) with your finger and turn it
counterclockwise until the spindle locks in the down position.
.
Fig.4a
1 - Inflation valve, 2 - partition