2022 Owner’s Manual Eagle 8 BRIG ltd
47
A blown fuse
or automatically disconnected fuse means that the device is defective.
Unplug the appliance and do not use it until the fault has been corrected.
Do not touch potentially damaged or loose cables when power is connected.
Turn OFF main switches before replacing or restarting fuses.
Before replacing or restarting any fuse, make sure that the cause of the blown has been eliminated.
Always install blade fuses of the correct rating.
Before reactivating the thermal breaker, make sure that the cause of the trip has been eliminated
Before replacing or restarting a blown fuse, make sure that the cause of the blown has been eliminated.
Don't consider yourself an expert, turn to professionals.
Faults in electrical systems can cause a fire.
Do not touch electrical wires or any electrical appliances if your hands or feet are wet.
Always have spare blade fuses on board in an easily accessible place.
The fuse holder box-1 and fuse holder box-2 (Fig.19) are located inside the steering console. All fuses in these boxes are
standardized blade fuses.
To replace a blown fuse, you need to open the cover of fuse holder box, pull out the blown fuse and install a new one of
the same rating.
To Next Page
Loading...
