2 BRIGGSandSTRATTON.COM
Advanced Monitoring Kit Contents
Keep this document with the generator operator’s manual after installation is complete.
infoHub™ Kit Contents:
A • Wire Ties
B • Rubber Grommet
C • Cellular Unit
D • Harness
E • Voltage Sensor
F • Antenna
G • Washer
H • Tape
J • Splice
Items needed to install the kit:
• Drill with 3/8 inch bit
• Alcohol wipes or other cleaning solution
• Standard and Phillips screwdrivers
• Volt meter or multimeter
• Wire cutter/stripper
• De-burring Tool
• Rust Inhibitor
B
C
D
F
G
H
E
A
J
Figure 1