Assembly
1. Prior to assembly, wash all tubes with soapy water and rinse
thoroughly. Rinse all other parts thoroughly with warm water as well.
2. Begin by connecting the main tube (A) and second tube (B) together
3. Insert the connected tubes into the bottom of the dispenser unit (D)
and twist clockwise, applying pressure until secure. (If experiencing
diculty you may place the head of the tube in boiling water for 10-
20 seconds in-order to soften the tip. )
4. Attach the spout (E) to the front of the dispenser unit with a slight
twist to secure, and ensure the spout opening is pointed downward.
5. After removing the bottle cap, insert assembled pump into the water
bottle. Turning connector ring (F) clockwise until it is tightly secure.
6. Press dispenser button (G) down rmly to dispense water and repeat.
Use
1. Place cup, glass or pitcher under spout
2. Press down on top of pump several
times to make water ow
Cleaning and Care
1. Clean pump with a cloth, mild
dishwashing soap and water
2. Clean tubes and spout in dishwasher
3. Store in a clean, dry location
4. For your convenience, a handy brush (H)
is included.
Portable Water Pump
H
To Next Page
Need help?
General
