Need help?Do you have a question about the Bristol Cars 100B and is the answer not in the manual?
Details about the Type 100B and B2 engine's capacity, bore, stroke, compression ratio, and power.
Procedure for decarbonizing the engine, including recommended gaskets.
Step-by-step guide for engine dismantling, cleaning, and reassembly.
Instructions for fitting the cylinder head, including push rods and valve adjustments.
How to adjust the fan belt tension for proper operation and cooling.
Detailed steps to safely remove the engine from the vehicle.
Instructions on how to attach and use an engine lifting sling for safe removal.
General sequence of operations for rebuilding an engine with new or reconditioned parts.
Lists cylinder block and main bearing parts with numbers and quantities.
Parts list for the camshaft drive cover and sump assembly.
Provides material, dimensions, and interference fits for cylinder block components.
Covers reboring, re-sleeving, and fitting new cylinder liners.
Procedures for checking and replacing camshaft bearings due to wear.
Instructions for removing and fitting new rocker bushes, including sizing.
Guidance on checking valve timing using the provided diagram.
Recommendations and procedures for replacing the timing chain.
Steps for removing the camshaft and procedures for refitting it.
Diagrams illustrating valve timing for positioning and running conditions.
Details on pistons, connecting rods, and their fitting procedures.
Information on standard and oversize pistons and their correct clearance.
Procedures for replacing the starter ring on the flywheel.
Information on flywheel material, grinding, and checking run-out.
Procedures for removing the crankshaft from the engine block.
Procedures for inspecting the crankshaft for wear, cracks, and alignment.
Guidance on regrinding crankshaft journals and related processes like nitriding.
Steps for refitting the crankshaft into the engine block, including bearing installation.
Overview of the engine lubrication system with diagrams.
Recommendations for oil grade, level, and pressure adjustment.
Procedures for removing, refitting, and inspecting the oil relief valve.
Servicing instructions for the full-flow oil filter, including element replacement.
Lists all electrical components with part numbers and quantities.
Details on the distributor drive casing, including clearances.
Steps to remove the distributor drive casing.
Procedures for taking apart and putting back together the distributor drive casing.
Guide to setting the ignition timing for different engine models.
Information on reconditioning distributor contact points.
Steps to set the contact breaker points gap.
Systematic checks to diagnose ignition system faults.
Procedure for replacing the ignition condenser.
Instructions for fitting, servicing, and replacing sparking plugs.
Lists special tools provided with the vehicle for maintenance.
Lists parts for Solex carburettors, air manifold, and petrol pipe.
Lists parts for petrol pump, exhaust manifold, and air cleaner.
Details on RHD and LHD engine control components like throttle and mixture.
Specifications for Solex carburettor settings for different car models.
Explanation of the Bi-starter system and its operation for cold starting.
How to set up and adjust the slow-running speed and mixture.
Steps for dismantling Solex carburettors and replacing gaskets.
Method for tuning and synchronising multiple carburettors for smooth running.
Guide to starting the engine with carburettor adjustments.
Instructions for cleaning and re-oiling the oil-wetted air cleaner element.
Information on the A.C. petrol pump, its components, and maintenance.
Steps for removing the petrol pump from the engine and refitting it.
General| Brand | Bristol Cars |
|---|---|
| Model | 100B |
| Category | Engine |
| Language | English |
To Next Page