Brizo MultiChoice 60 Series User Manual (English)

To Next Page

MultiChoice

Valve Trim

Installation Instructions

Owners Manual

60 Series

Write purchased model number here.

Table of Contents:

Warranty ............................................................................. Page 2

Installation Instructions ....................................................... Pages 3 - 7

Maintenance ....................................................................... Page 7

Replacement Parts ............................................................. Pages 8-14

You May Need

THIS VALVE MEETS OR EXCEEDS THE

FOLLOWING STANDARDS:

ASME A112.18.1/CSA B125.1 and ASSE 1016.

CAUTION: This system/device must be set by the

installer to ensure safe, maximum temperature.

Any change in the setting may raise the discharge

temperature above the limit considered safe and

may lead to hot water burns.

NOTICE TO INSTALLER: CAUTION!–As the

installer of this valve, it is your responsibility

to properly INSTALL and ADJUST this valve

per the instructions given. This valve does

not automatically adjust for inlet temperature

changes, therefore, someone must make the

necessary temperature knob adjustments at

the time of installation and further adjustments

may be necessary due to seasonal water

temperature change. YOU MUST inform the

owner/user of this requirement by following the

instructions. If you or the owner/user are unsure

how to properly make these adjustments, please

refer to page 7 and if still uncertain, call us at

1-877-345-BRIZO (2749).

After installation and adjustment, you must afﬁx

your name, company name and the date you

adjusted the temperature knob to the caution label

provided and apply or attach the label to the back

side of the closest cabinet door and the warning

label to the water heater. Leave this Instruction

Sheet for the owner’s/user’s reference.

WARNING: This thermostatic bath valve is

designed to minimize the effects of outlet water

temperature changes due to inlet pressure and

temperature changes, commonly caused by

dishwashers, washing machines, toilets and

the like. It may not provide protection from hot

water burns when there is a failure of other

temperature controlling devices elsewhere

in the plumbing system, if the temperature

knob is not properly set or if the hot water

temperature is changed after the settings

are made or if the water inlet changes due to

seasonal changes.

WARNING: Do not install a shut-off device on

either outlet of this valve. When this type of

device shuts off the water ﬂow, it can defeat

the ability of the valve to balance the hot and

cold water pressures.

For easy installation of your Brizo

faucet you

will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings,care, and

maintenance information.

ASME A112.18.1 / CSA B125.1

ASSE 1016

76130 Rev. A 9/11/13

Other manuals for Brizo MultiChoice 60 Series

Installation Instructions32 pages

Need help?

Do you have a question about the Brizo MultiChoice 60 Series and is the answer not in the manual?

Brizo MultiChoice 60 Series Specifications

General

ADA Compliant	Yes
Installation	Deck-mounted
Water Supply	Hot/Cold
Outlet Connection Type	Varies based on valve rough-in kit and diverter configuration
Material	Brass
Finish	Luxe Gold, Polished Nickel
Spout Height	N/A (Valve Trim Only)
Spout Reach	N/A (Valve Trim Only)
Hole Configuration	Single-hole
Handle Type	Lever
Installation Type	Deck-mounted
Warranty	Limited lifetime