EasyManua.ls Logo

Broadcom Brocade X7-4 Director - Page 11

Broadcom Brocade X7-4 Director
215 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
X7-4-Install-IG100 Installation Guide
Brocade
®
X7-4 Director Hardware Installation Guide
SKU Part Number Short Description
Minimum OS for
the X7 Chassis
Currently Supported
FC32-64 Blade
XBR-X6-0164
Port blade with 16 QSFP+ Flexports
that can be configured for FC or FCoE
operation. Each port can operate at
speeds up to 4x32Gb/s for a total of
64 32Gb/s ports per blade with FC
transceivers installed. Optionally, you can
install Ethernet transceivers and configure
for FCoE operation. Various GbE speeds
are supported.
Fabric OS 9.0.0 Yes
FC64-48 Blade XBR-X764-0148 Port blade with 48 front-end 64Gb/s FC
SFP+ ports with edge switch interconnect
to the core blades. All FC blade features
are supported. Supported SFPs include
10Gb/s, 32Gb/s, and 64Gb/s FC.
Fabric OS 9.0.0
Yes
FC32-X7-48 Blade XBR-X732-0148 Port blade with 48 front-end 32Gb/s FC
SFP+ ports with edge switch interconnect
to the core blades. All FC blade features
are supported. Supported SFPs include
32Gb/s, 16Gb/s, and 10Gb/s FC.
Fabric OS 9.0.0
Yes
CPX7 Blade
XBR-CPX7-0103 Control processor (CP) blade. Fabric OS 9.0.0 Yes
CR64-4 Blade
XBR-X74-0106
Core routing blade provides 192 backend
FC links to the port blades in the X7-4
Director. Each CR64-4 blade provides 8
QSFP connections supporting 32 Gen 7
ICL ports.
Fabric OS 9.0.0
Yes
SX6 Blade
XBR-SX6-0000 Extension blade with 16 32Gb/s Fibre
Channel SFP+ ports, 16 10GbE SFP+
ports, and 2 40GbE QSFP+ ports.
Fabric OS 9.0.0 Yes
WWN Card
XBR-X7-0124 World Wide Name card. Fabric OS 9.0.0 Yes
Blade Slot Filler
Panel
XBR-X7-0128 Required to cover the empty slot to
maintain airflow in the chassis.
Fabric OS 9.0.0 Yes
Power Supply
Assembly Slot
Filler Panel
XBR-X6-0130 Required to cover the empty slot to
maintain airflow in the chassis.
Fabric OS 9.0.0 Yes
The following blades require optics that are labeled with an SEC designation:
Brocade FC64-48 Port Blade
Brocade FC32-X7-48 Port Blade
The following image provides an example of an optic label with SEC in the description (32G LW-SEC 10km).
X7-4-Install-IG100
11
Broadcom

Table of Contents