X7-4-Install-IG100 Installation Guide
Brocade
®
X7-4 Director Hardware Installation Guide
Figure 2: Nonport Side of the X7-4 Director (Example Configuration)
1. WWN Bezel (logo plate - WWN cards behind)
2. Power Supply Assembly
3. Fan Assembly
4. 2AWG Panduit LCD2-14AF Lug for Building Ground Connection
Depending on the fans and the power supplies installed, airflow can be from the port side to the nonport side or from the
nonport side to the port side of the chassis through the side air vent. Use the Chassis Airflow Diversion and Port Side
Exhaust Kit to divert airflow so that air fully exhausts to the port side of the chassis or is fully drawn from the port side of
the chassis while mounted in a four-post rack.
Although not illustrated, the chassis label that contains the serial number, SKU, and WWN is located on the upper portion
of the chassis to the left of the fan assemblies.
X7-4-Install-IG100
18
To Next Page
Loading...