X7-4-Install-IG100 Installation Guide
Brocade
®
X7-4 Director Hardware Installation Guide
Installation Task Time Estimate Items Required
Obtain a USB drive pretested by Broadcom 20 minutes Brocade recommends the use of a USB
drive that has been test-validated (verified)
by Broadcom (Brocade):
•
SanDisk 32 CZ48 USB 3.0 Flash Drive
(SDCZ48-032G-UAM46)
•
SanDisk 16 CZ48 USB 3.0 Flash Drive
(SDCZ48-016G-UAM46)
•
Kingston 32GB DataTraveler 100 G3
USB 3.0 Flash Drive (DT100G3/32GB)
•
Kingston 32GB DataTraveler G4 USB
3.0 Flash Drive (DTIG4/32GB)
•
PNY Attache 3.0 4 USB 32GB Flash
Drive
•
PNY Attache 3.0 4 USB 16GB Flash
Drive
These drives are not orderable from
Broadcom but are generically-branded and
can be purchased from other suppliers.
Shipped Items
When unpacking the device, follow procedures under Unpacking and Transporting the Device. Verify that you have the
following items. Save shipping cartons and packaging in the event you need to return the device.
The following items are packaged in device shipping carton:
•
Brocade X7 Director with a shipping tray
•
Packing foam
•
Antistatic plastic
•
Inner foam
The following items are packaged in a device shipping carton or separate carton:
•
Door (for EMI compliance)
•
ESD wrist strap
•
Cable management finger assembly
•
China-RoHS Hazardous/Toxic Substance statement
•
Brocade documentation web pointer card
•
Rack mount kit for your device
•
Ground lug kit
•
Airflow Diversion Kit Documentation
•
X6-4 Shipping Bracket Installation Documentation
•
X6-8 Shipping Bracket Installation Documentation
•
Ball Stud Hardware Assembly for Door Mounting
X7-4-Install-IG100
23