BroadLink SP3 - User Manual

BroadUink
Quick Setup Guide
SP3S
o Workswith
® Google Assistant
alexa
WORKS WITH}
I Overview
LED indicator
Power(reset) button
Vents
Name: Smart Plug
Model: SP3S
Ratings: 230V~, 50/60Hz, 16A
Size: 50 x 81.6 x 94mm
Manufacturer: Hangzhou Gubei Electronics Technology Co., Ltd.
Address: Room 106, Building 1, No. 611 Jianghong Road, Binjiang,
Hangzhou, Zhejiang 310052 PR. China
I Indications
Status
Indication
Flashes quickly
(5 times/sec)
Device is in Smart Setup mode
(waiting to be added).
Flashes slowly then off
Device is being set up and added to
network
Flashes slowly
continuously
Device is failed to connect to network
or disconnected from network
ON/OFF
Device is switched on/off
- Reset for Smart Setup
when the device is in any conditions, press and hold the power (reset)
button for 5s until the LED indicator flashes quickly.
What’s required
Internet é
P
—
Rotter
Phone
Power on device
- A smartphone or tablet running
105 9.0 / Android™ 4.1 or higher.
- A 2.4GHz Wi-Fi network with
Internet connection,
- Power on the device and make
sure the LED indicator is flashing
quickly .
Get the APP
Google Play
- Connect your smartphone to
your home Wi-Fi network
(2.4GHz only).
. Download the latest
"BroadLink” APP from APP
Store, Google Play and install it
on your smart phone.
Signin APP
Sign in with
‘ G Google Account ’
- Open the BroadLink APP tap
"BroadLink account” and sign in
to your cloud account.
- If you don't have an account,
tap the “Sign up"” to create a
new account,
- Link your account with Apple ID
or Google account for guick
sign-in next time (optional).
- Tap "+" on top right corner and
Add device in APP
BroadLink wants to
join WLAN network
“BroadLink_Wi-Fi_Device"?
[ Cancel‘, Join
"N
choose "Add device”.
- The APP will start AP mode, tap
“Cancel” to skip it.
- Tap “Next” to start Smart Config
setup.
Connect device
to Wi-Fi network
Which Wi-Fi will device connect?
L
A 4
‘ Wi-Fi Name ’
Password O ’
Connect to Wi-Fi
« Choose your home Wi-Fi network,
input password and tap “Connect
to Wi-Fi", the LED indicator will be
flashing slower and then off. The
device is successfully connected.
- Choose the room and name the
device.
- Control device at BroadlLink APP
NOW.
Download Alexa,
Google home
- Download the latest version of
Alexa or Google Home APP.
- In Alexa APP tap " =" and choose
"Skills & Games” Tap “Q " to
search and enable “BroadLink”,
- In Google Home APP tap "+" and
choose “Set up device” Tap
“works with Google”, then
search and enable "BroadLink”.
Link account
- Tap "BroadLink account” and
« Link your email with Apple ID or
- Complete the skill account
Discover devices
Sign in with
{ G Google Account
’ Alexa is discovering devices...
This may take up to 45 seconds.
- After discovering devices, you
signin. will be able to control the device
by APP or voice. Congratulations!
*|f you are setting up the second
device, you will get notification
from Alexa after STEP 4 is
linking. completed, or you can find the
device in Google Home APP after
few minutes.
Google account for quick sign-in
later (optional)
I Note
« This product supports only Wi-Fi 80211 b/g/n (2.4G).
- Please follow the instruction to set up your device. In case of any issue,
please contact the authorized dealers or BroadLink customer service.
- Specifications may be altered without prior notice.
- Please subject to the actual product performance.
I Caution
- Do not connect after each other. (Nicht hintereinander stecken).
- Only indoor use. (Nur zur Verwendung in trockenen Raumen).
« To disconnect Voltage pull the plug. (Spannungsfrei nur bei
gezogenem Stecker).
* Google Assistant is not available in certain languages and countries.
Google, Google Play, Google Home and Android™ are trademarks of Google
LLC.
Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or
its affiliates.

Summary

Product Overview and Specifications

Device Status Indications

Smart Setup Reset Procedure

Instructions on how to reset the device to Smart Setup mode by holding the power button.

Step 1: Setup Prerequisites

Step 2: Download the BroadLink App

Step 3: Sign In to BroadLink Account

Step 4: Add Device to the App

Step 5: Connect to Wi-Fi Network

Step 6: Integrate with Voice Assistants

Step 7: Link BroadLink Account

Step 8: Discover Devices

Important Product Notes

Safety and Usage Cautions

BroadLink SP3 Specifications

General

Model	SP3
Type	Smart Plug
Wi-Fi	802.11 b/g/n
Input Voltage	100-240V AC
Maximum Load	16A
Max Power	3680W
App Support	BroadLink App
Frequency	50/60Hz
Current	16A
Voice Control	Amazon Alexa, Google Assistant